RHINO DX-V Series Owner's Manual page 3

RHINO DX V MOTOR OWNER'S MANUAL
1. GENERAL
Introduction ......................................................................... 1.1
Warranty terms .................................................................... 1.2
2. SYSTEM OVERVIEW AND SETUP
Assembly .............................................................................. 2.1
Electrical connection (for 12V batteries only!) ...................... 2.2
Putting the motor into operation ......................................... 2.3
Multifunction display ........................................................... 2.4
Depth adjustment and steering tension ............................... 2.5
USB port ............................................................................... 2.6
Changing/attaching the propeller ........................................ 2.7
3. MAINTENANCE
Maintenance and care of the motor ..................................... 3.1
Troubleshooting ................................................................... 3.2
Error codes on the display .................................................... 3.3
Debugging ........................................................................... 3.4
4. DECLARATION OF CONFORMITY
5. TECHNISCHE DATEN & ERSATZTEILE
1. GENERAL
1.1 Introduction
Congratulations on purchasing a DX-V Rhino electric
boat motor.
This motor is a ZEBCO development, specially adapted to the
requirements of shing. High-quality material and design,
in combination with sophisticated technology, make this
motor a durable and reliable companion in all situations. For
the continuous improvement of our products, we reserve the
right to change parts and components without prior notice or
noti cation. To avoid unnecessary operating errors, please read
the following operating instructions carefully.
Always wear a life jacket when using the motor. Pay attention
to weather conditions and keep an eye on battery capacity
when boating.
Slow down near the shore and in shallow water. Always avoid
ground contact. Tilt the motor if there is a risk of touching the
ground.
Watch out for swimmers in the water and always keep enough
distance!
1.2 Warranty terms
The DX-V Rhino electric boat motor is warranted for 2 years
(only valid in conjunction with proof of purchase) from
the date of purchase.
The warranty does not cover wear parts. The warranty applies
exclusively to non-commercial use of the motor and does not
apply in the event of operating errors, accidents, improper
repairs or changes made to the product.
Service and repairs may only be carried out by Zebco Europe
GmbH or authorised service partners.
2. SYSTEM OVERVIEW AND SETUP
2.1 Assembly
Attach the motor to the bow. Make sure to tighten both moun-
ting bolts rmly (Fig. 1).
To adjust the mounting angle or to swing the motor out of the
water, grasp the motor head with one hand, then press and
hold the positioning lever (Fig. 2) with your other hand until
the desired position has been reached. Release the lever and
make sure that the mechanism locks rmly into place
1
CAUTION: If the boat is to be taken out of the
water, the motor must be removed beforehand.
Always disconnect the battery before attaching or
removing the motor.
2
3