Table of Contents
Advertisement
Cleaning the base unit
You can remove any visible dirt in the
base unit.
CAUTION
Risk of cutting!
Touching sharp edges on the heat
exchanger may lead to cuts.
Do not touch the fins on the heat
▶
exchanger.
Open the base unit → Page 36.
1.
Use a soft brush to clean the heat
2.
exchanger cover.
Make sure that you remove all dirt
from the seal.
Lift the middle tab on the insert
3.
slightly.
Cleaning and servicing en
Pull the insert out horizontally.
4.
Clean the insert under running wa-
5.
ter and dry it off.
Carefully clean the fins on the heat
6.
exchanger with a vacuum cleaner
and brush attachment.
Ensure that you vacuum the fins
from top to bottom so that they do
not become deformed or dam-
aged.
37
Advertisement
Table of Contents
