Advertisement
3.
Push the tank cover up and remove the tank lid (Figure 2).
4.
Fill the tank (Figure 3). Note: Do not exceed the max 250ml capacity.
5.
Return the water tank cover to the water tank (Figure 4).
6.
Return the water tank and click it into the original position (Figure 5).
IMPORTANT: Always unplug the cleaner when adding water.
1.
ACCESSORY INSTALLATION
BEFORE YOU BEGIN CLEANING
1. Jet Nozzle Installation:
- Align the nozzle with the air outlet head at the front of the main unit,
then rotate it until the nozzle is firmly attached in place (figure 1).
2. Accessory Brush Installation:
- Attach the brush accessory on the nozzle. Note that the direction of the
elbow of the small brush is as shown in the figure, facing downward (figure 2).
1.
8
2.
3.
4.
2.
5.
Advertisement
