Pioneer XC-L77 Service Manual page 54

XC-L77
Remote Control
1
18
REMOTE LOCATOR
ON OFF
17
STANDBY/ ON
16
1 MENU – Press to access various features,
including station memory naming, changing the
tape reverse mode, and so on.
2 Tape deck mode – Press to switch the sound
to tape deck and start the tape playing (if
there's one loaded).
3 SOUND – Press to put the $ and ›
buttons into tone, subwoofer level and balance
control mode.
4 DISPLAY – Press to change the kind of infor-
mation that the display shows. The choices
available depend on the current function (CD,
tape, etc.).
5 SET – Press to finish operations such as
setting the clock, setting the reverse mode, and
so on.
6 MD REC – Press to put MD recorder into
record-pause mode.
7 TAPE REC – Press to put tape deck into
record-pause mode.
8 TIMER/CHARACTER – Press to start setting
the timer. Also use to select characters when
naming tuner station memories, etc.
54
2 3 4 5
AUX/CD-R SOUND DISPLAY SET
15
7 8 9
6
&
MD TAPE TIMER/
REC CHARACTER CANCEL
9 & CANCEL – Press to stop playback (or
recording) of the CD/MD/tape. Also use to
cancel operations, such as setting the clock,
before the button has been pressed.
SET
10 $ › buttons – Press to fast-reverse / fast-
forward the CD/MD/tape.
11 CD mode – Press to switch the sound to CD
and start the disc playing (if there's one
loaded).
12 Up – Use to raise the volume.
13 Down – Use to lower the volume.
14 Tuner mode – Press to switch the sound to
tuner, switch between AM and FM, and switch
between preset station memories.
15 MD mode – Press to switch the sound to MD
and start the disc playing (if there's one
loaded).
16 STANDBY/ON – Press to switch the unit
between standby and on modes.
Note: this unit consumes about 1W of electric-
ity in standby mode.
17 AUX/CD-R mode – Press to switch the sound
to the component connected to the AUX/CD-R
inputs.
18 REMOTE LOCATOR – Use to switch on/off
remote locator.
10 11 12
$ ›
VOL
! — + ⁄
14 13