Setting The Time; In The Instrument Cluster - BMW 2010 Z4 Owner's Manual

Entering deadlines for legally required
inspections*
Make sure the date on the Control Display is set
correctly, refer to page 72; otherwise, the effec-
tiveness of CBS Condition Based Service is not
ensured.
1. "Vehicle Info"
2. "Vehicle status"
3. "Service required"
4. "§ Vehicle inspection"
5. Open the menu for entering the deadline.
6. "Date:"
7. Create the settings.
8. Press the controller to apply the setting.
The year is highlighted.
9. Turn the controller to make the adjustment.
10. Press the controller to apply the setting.
The date entry is stored.
To exit from the menu:
Move the controller to the left.
More information on the BMW Maintenance
System can be found on page 206.
Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG
Clock

Setting the time

In the instrument cluster

To set the 12h/24h mode, refer to Setting the
time format below.
1. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the time and the word "SET".
2. Press button 2.
3. Use button 1 to set the hours.
4. Press button 2 to confirm the entry.
5. Use button 1 to set the minutes.
6. Press button 2 to confirm the entry.
7. Press button 2.
The system accepts the new time.
Via iDrive
1. Press the button.
The main menu is displayed.
71