Table of Contents
Advertisement
Inserting mobile phone
1.
If applicable, remove the protective cap
from the mobile phone's antenna connector
so that the mobile phone can engage in the
snap-in adapter.
2.
With its buttons facing upward, slide the
mobile phone up towards the electrical con-
tact points and press it downward until it
engages.
The mobile phone's battery is charged as soon
as the vehicle is in radio readiness or the steer-
ing is unlocked.
To conserve vehicle battery power, you
should avoid using the mobile phone
when the ignition is switched
Removing mobile phone
Press the button.
Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG
off.<
181
Advertisement
Table of Contents
