Table of Contents
Advertisement
Installation
1.
Insert the wind deflector 1 into the holders 2
on the rollover bars; the arrow should point
in the direction of travel.
2.
Push the wind deflector down, arrow 1, and
then push down and forward simulta-
neously, arrow 2, until it engages.
The wind deflector must engage firmly;
otherwise, it could become detached at
higher vehicle
speeds.<
Removing the wind deflector
1.
Push the wind deflector down and back
simultaneously, arrow 1, to disengage it
from the catch mechanism.
2.
Pull the wind deflector upward out of the
holders, arrow 2.
40
Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG
Coat hooks
Coat hooks 1 are located on the wind deflector
panels in the rollover bars.
Do not hang heavy objects on the hooks.
If you do, they could endanger the pas-
sengers, for example during braking or evasive
maneuvers.<
Storage
Fold the wind deflector 1 and slide it into the
1.
storage pouch 2.
2.
You can store the wind deflector on the lat-
eral storage shelf behind the seats.
Advertisement
Table of Contents
