Setting The Time; In The Instrument Cluster - BMW 2010 128 Owner's Manual

Entering deadlines for legally required
inspections*
Make sure the date on the Control Display is
always set correctly, refer to page 70; other-
wise, the effectiveness of Condition Based Ser-
vice CBS is not ensured.
1. "Vehicle Info"
2. "Vehicle status"
3. "Service required"
4. "§ Vehicle inspection"
5. Open the menu for entering the deadline.
6. "Date:"
7. Create the settings.
8. Press the controller to apply the setting.
The year is highlighted.
9. Turn the controller to make the adjustment.
10. Press the controller to apply the setting.
The date entry is stored.
To exit from the menu:
Move the controller to the left.
More information on the BMW Maintenance
System can be found on page 203.
Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG
Automatic Service Request*
Data regarding the maintenance status or
legally mandated inspections of the vehicle are
automatically transmitted to your BMW center
prior to a service due date.
You can check when your BMW center was
notified.
1. "Vehicle Info"
2. "Vehicle status"
3. "Options"
4. "Last Service Request"
Clock
The settings are stored for the remote control
currently in use, refer also to Personal Profile on
page 26.

Setting the time

In the instrument cluster

To set the 12h/24h format, refer to Setting the
time format on page 70.
1. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
69