Rain Sensor; Wiper System - BMW 2010 128 Owner's Manual

Unusually rapid flashing of the indicator
lamp and the turn signals indicates that
one of the turn signal bulbs has
Indicating a turn briefly
Press the lever as far as the resistance point for
as long as you wish to indicate a turn.
Triple turn signal activation
Press the lever as far as the resistance point.
The turn signals flash three times.
You can activate or deactivate this function.
1. "Settings"
2. "Lighting"
3. "Triple turn signal"
Triple turn signal activation is activated and
is stored for the remote control currently in use.

Wiper system

1 Switching on wipers
2
Switching off wipers or brief wipe
3 Activating/deactivating intermittent wipe or
*

rain sensor

4 Cleaning windshield and headlamps
60
Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 846 - © 08/09 BMW AG
5 Setting speed for intermittent wipe, or sen-
sitivity of the rain sensor
failed.<
Switching on wipers
Press the lever upward, arrow 1.
The lever automatically returns to its initial posi-
tion when released.
Normal wiper speed
Press once.
The system switches to operation in the inter-
mittent mode when the vehicle is stationary.
Fast wiper speed
Press twice or press beyond the resistance
point.
The system switches to normal speed when the
vehicle is stationary.
Intermittent wipe or rain sensor*
If the car is not equipped with a rain sensor, the
intermittent-wipe time is a preset.
If the car is equipped with a rain sensor, the time
between wipes is controlled automatically and
depends on the intensity of the rainfall. The rain
sensor is mounted on the windshield, directly in
front of the interior rearview mirror.
Activating intermittent wipe or rain
sensor
Press the button, arrow 3. The LED in the but-
ton lights up.
Setting speed for intermittent wipe or
sensitivity of the rain sensor
Turn the thumb wheel 5.
*