Battery And Charge; Laser Safety Information - Lenovo Robotic User Manual

Battery and charge

• Please do not use any third-party battery, charger, or charging stand.
• Please do not disassemble, repair, or modify the battery or charging dock.
• Please do not place the charging dock near to any heating source(such as the heater)
• Please do not wipe the charger pad with a damp cloth or wet hands.
• Please do not throw away the waste batteries. They should be handled by a professional recycling agency.
• If the power cord is damaged or broken, stop using it immediately and purchase or replace it through Lenovo official service.
• If the product needs to be transported, please make sure the Robot is turned off. It is recommended to pack the Robot in its
original packing box.
• If the Robot will not be used for a longtime, please fully charge it. Turn off the main machine and store in a dry/cool place.
Charge the Robot at least every 3 month to avoid over drain.

Laser safety information

• This laser sensor meets the class 1 laser product standard of 1EC60825 and does not produce dangerous laser radiation.
• Execution standard: 1EC60335
Product performance failure table
Name Performance failure
Failure of listed functions in instruction
Cannot power on
Main machine
Main Brush, side Brush, fan or Driving wheel are not working.
Power adapter Unable to provide power to the Charging Dock.
Charging dock Unable to provide power to Robot.
CLASS 1 LASER PRODUCT
23