Spot Cleaning - Lenovo Robotic User Manual

Operating Instructions
Loss of regional information
Case 1: Starting the Robot in a new area to clean can
cause the Robot to re-create map.
Case 2: The main changes of the environment may result
in the failure of reposition and may trigger to re-create
the map. Regenerating map will lose all the settings of
the original one (including the off-limit area zone).
Charge
Automatic mode: After cleaning is completed, the
device will automatically return to the charging dock
to recharge itself. Manual mode: Under paused state,
short press the charging
or the APP triggers the recharge.
Note: Please make sure that the charging dock is connected to
the power. If the Robot does not find the charging dock, it will
return to the starting position. Please manually put the Robot
back into the charging dock to recharge.
key to start the recharge,

Spot cleaning

1) Customized area cleaning
Users can define one or more of the size and location of
the cleaning area. Under such a condition, Robot will
only clean the set area and will NOT clean the unset
area. Meanwhile, the number of cleanings can be set.
The default cleaning is 2 times and 1 time cleaning can
also be set optionally.
11