Do Not Disturb Mode; Cleaning Mode - Lenovo Robotic User Manual

Operating Instructions
Do-not-disturb mode
During the Do-Not-Disturb period, Robot will not
automatically power off and play voice. The Do-Not-Dis-
turb mode is enabled by default after the main unit has
been deployed with internet for the first time. The open
period is from 22:00 to 08:00. You can use the phone
App to turn off the Do not disturb mode or modify the
Do-Not-Disturb mode time period.

Cleaning mode

Quiet, standard, powerful and Max
modes can be chosen by the phone App.
The default is automatic mode.
Mopping mode
the suction is very low in this mode,
so it is recommended to use this
mode after cleaning.
Usage of water tank
Note: In order to have a better mopping effect, it is
recommended to use the water tank to mop after the robot
vacuum completes at least three indoor cleanings.
Step1: add water Step2: buckle up the
water tank
•
The device mopping function only has a wiping effect, which helps deep
cleaning, but can not effectively remove stubborn stains (such as dried coffee
stains, etc.), and can not completely replace labor.
•
If you have carpet in your home, please use the mopping function carefully.
In order not to soil your carpet, do not use the mopping function on the
carpet. You can avoid the equipment from entering the carpet area by setting
the off-limited area APP.
•
If you need to add water or clean the rag while the vacuum is cleaning,
please pause it, press and hold the button to pull out the water tank, add
water or clean it, then put the water tank back into the vacuum and place the
vacuum back to its original spot. When you start it again, the vacuum will try
continue cleaning according to the plan.
•
For safety reasons, it is recommended to remove the water tank assembly
when charging to avoid damaging the wooden floor.
•
Do not use the water tank to mop the floor when no one is at home.
14
Step3: stick on the Step4: Push the water
mopping cloth tank horizontally into the
bottom of the main unit