Installation Instructions - Lenovo Robotic User Manual

Installation Instructions

1) Connect the power cord, put extra wire in the slot.
Note：
•
The extra power cord touched the ground can be pulled by the main
unit to cause the interruption of charging.
•
The charging dock indicator is always on and goes off when charging.
3) For the convenience of the robot vacuum cleaning and
recharging properly, please do not frequently move the
charging dock. If the location of the charging dock is
changed, the robot vaucm may lose the map due to failure
in positioning. When it works again, the robot vacuum will
re-create and memorize the map.
Note:
• Re-creation may result in the loss of information of off-limit area
zone and regional cleaning.
• Avoid direct sunlight
Wall
Ground
2) Place the charging dock on a level ground and connect the power
supply.
Note:
•
Please make sure that there are more than 0.5 meter (feet) space
on both sides of the charging dock and more than 1.5 meters (feet)
space in front of the charging dock.
•
Put damp-proofing pad in front of charging dock
8