Operation; Cleaning And Maintenance - AmazonBasics B07SG47NS3 Manual

Floor nozzle (A)
Use the floor nozzle (A) to vacuum soft or hard floor.
• Connect the floor nozzle (A) to the suction opening of the hand-held unit (K).
Crevice nozzle (N)
Use the crevice nozzle (N) to vacuum hard to reach areas.
• Connect the crevice nozzle (N) to the suction opening of the hand-held unit (K).

Operation

Switching on/off
NOTICE
• To switch on, set the on/off switch (E) to I position.
• To switch off, set the on/off switch (E) to O position.
CAUTION

Cleaning and Maintenance

WARNING
WARNING
NOTICE
Cleaning the dust container (B)
• Press the dust container release button (D) and remove the dust container.
• Slide the dust filter (C) out of the dust container (B).
• Empty the dust container (B).
• Rinse the dust container and let it dry.
• Slide the dust filter (C) back in place.
• Connect the dust container (B) with the hand-held unit (K). Ensure it clicks in
place.
NOTICE
6
Before switching on the product ensure that the filters and
attachments are properly installed. Do not use the product without
the filters.
Risk of tripping hazard! Lay out the supply cord in such a way that
no unintentional pulling or tripping over is possible.
Risk of electric shock! To prevent electric shock, unplug before
cleaning.
Risk of electric shock! During cleaning do not immerse the
electrical parts of the product in water or other liquids. Never hold
the product under running water.
Clean the parts regularly to ensure the proper and efficient
operation.
Be careful when removing the dust filter (C).