Directions For Use; Paper Roll Holder Use; Wave Backrest Use - OAKWORKS MEDICAL PRODUCTS Powerline Series User Manual

DIRECTIONS FOR USE

P A P E R R O L L H O L D E R U S E
After the table is set-up,
locate the hole in the leg
at the head end.
W A V E B A C K R E S T U S E
CAUTION
TO RAISE THE BACKREST
Lift the backrest to the desired height and
release. The Backrest support arm will lock in
the nearest slot in the side rail.
T A B L E E X T E N D E R
CAUTION
The Table Extender lengthens
the table for your tallest patients
and can improve access to your
patient.
Using the supplied
screw & Allen wrench,
secure the paper roll
holder bracket into
place. Repeat step for
the opposite side.
Do not adjust the Backrest with a patient on the table.
Do not put excessive weight or pressure on the table extender.
Locate the Accessory
attachment outlets.
Locate the wooden
dowel & feed it through
your paper roll. Place
the wooden dowel in
the groove located in
each of the paper roll
holder brackets.
TO LOWER THE BACKREST
Lift the backrest slightly, lift and hold the sup-
port arm out of the slot and lower the backrest
to the desired position.
Unfold the dowels and
insert into the outlets.
To secure the wood-
en dowel, feed it into
the pocket of the
groove on both sides
of the table.
7