Acura 2008 RDX Owner's Manual page 69

Main Menu
U.S. Canada
Parking Brake and Brake System
Indicator (Red)
This indicator has two functions:
1. It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ''RELEASE
PARKING BRAKE'' message on the
multi-information display (see page
77 ).
Table Of Contents
2. If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, it can
indicate a problem in the brake
system. You will also see a
''BRAKE FLUID LOW'' or
''CHECK BRAKE SYSTEM''
message on the multi-information
display. For more information, see
page 383
2008 RDX
.
Instrument Panel Indicators
U.S. Canada
Brake System Indicator (Amber)
The brake system indicator (amber)
normally comes on for a few seconds
when you turn the ignition switch to
the ON (II) position. If the indicator
is still on or comes on again after the
engine starts, there is a problem in
the brake system including the
electric vacuum pump. If this
happens, have your vehicle checked
by your dealer. For more information,
see page 384 .
You will also see a ''CHECK BRAKE
SYSTEM'' message on the multi-
information display (see page 77 ).
65