Acura 2008 RDX Owner's Manual page 357

Main Menu
SOCKET
BULB
3. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Table Of Contents
5. Press the brake pedal to make
sure the new bulb is working.
6. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
7. Reinstall the high-mount brake
light assembly into the tailgate.
Tighten the two screws and
reinstall the covers.
2008 RDX
Side Turn Signal Light
Each outside mirror has side turn
signal lights. The lights should be
replaced by your dealer.
Replacing a Rear License Plate
Light Bulb
The license plate has two lights
above it. The bulbs should be
replaced by your dealer.
Lights
353