Acura 2008 RDX Owner's Manual page 356

Hide thumbs Also See for 2008 RDX:

Table of Contents

Remove the electrical connector

from the bulb by pushing on the

tab and pulling the connector

Remove the bulb from the fog

light assembly by turning it one-

quarter turn counterclockwise.

Table Of Contents

Install the new bulb into the hole

and turn it one-quarter turn

clockwise to lock it in place.

Push the electrical connector back

onto the bulb. Make sure it is on

all the way.

Turn on the fog lights to test the

Put the undercover in place.

Reinstall the clip, and tighten the

screw securely.

Replacing a High-mount Brake

Remove the two screw covers on

the light assembly by prying on

the side edge with a flat-tip

screwdriver.

Remove the screws with a Phillips-

head screwdriver, then remove

the light assembly from the

Chapters

Table of Contents