Acura 2008 RDX Owner's Manual page 353

Main Menu
3. Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
4. Turn on the lights to make sure
the new bulb is working.
Table Of Contents
Replacing Rear Bulbs
(in Tailgate)
1. Open the tailgate. Place a cloth on
the edge of the light assembly
cover. Remove the cover by
carefully prying in the notch on its
middle edge with a flat-tip
screwdriver.
2. Determine which of the two bulbs
is burned out: taillight or back-up
light.
2008 RDX
COVER
NOTCH
BULBS
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Lights
SOCKETS
CONTINUED
349