Table of Contents
Advertisement
14
www.raider.bg
period of time.
Store the tool in an area that is out of the reach of children and people unfamiliar with
•
hydraulic pipe benders.
14. TROUBLESHOOTING\
Warning! Use caution when troubleshooting a malfunctioning tool. Completely Resolve all
problems before use. If the solutions presented in the Troubleshooting guide do not solve the
problem, have a qualified Technician inspect and repair the tool before use.
PROBLEM
Remove the workpiece, die and any other
external load from the bottle jack before
carrying out the
The tool cannot bend
the pipe.
Ram extends or retracts
feebly.
Oil is leaking from the
fi ller plug.
SUGGESTED SOLUTION(S)
Remove the workpiece, die and any other
external load from the bottle jack before
carrying out the
solution(s).
1.
Check whether the release valve (4)
is tightly closed
2.
2. Check for oil leaks.
3.
3. Check whether the oil in the bottle
jack is adequate and refi ll
4.
if needed.
5.
4. Bleed the bottle jack to allow
excess air to escape from the
6.
bottle jack.
1.
Check whether the oil in the bottle
jack is adequate and refi ll
2.
if needed.
3.
2. Bleed the bottle jack to allow
excess air to escape from the
4.
bottle jack.
5.
3. Check if you have fi lled the bottle
jack with correct hydraulic
6.
oil.
Check whether there is too much oil in the
bottle jack.
Advertisement
Table of Contents
