Acura 2008 TL Owner's Manual page 304

Main Menu
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
4. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
5. Test the lights to make sure the
new bulb is working.
Table Of Contents
6. Reinstall the trunk lining. Make
sure it is installed under the edge
of the trunk seal.
7. Insert the fastener into the hole on
the side of the trunk lining, and
push in the head of the fastener.
Screw the cargo net hook into the
fender.
2008 TL
Replacing the Back-up Light Bulb
(in Trunk Lid)
LEFT STOP RIGHT STOP
CORNER
LEFT SIDE FASTENER
FASTENER
1 a. Determine which back-up light
is out (left or right), then open
the trunk.
Lights
TRUNK LID
INNER
HANDLE
CORNER
FASTENER
CONTINUED
301