Acura 2008 TL Owner's Manual page 150

Main Menu
Loading Discs in the Changer
To load multiple discs in one
operation:
1. With the ignition switch in the
ACCESSORY (I) or ON (II)
position, press and hold the LOAD
button until you hear a beep and
see ''LOAD'' in the display, then
release the button.
Insert a disc into the slot. Insert it
2.
only about halfway; the drive will
pull it in the rest of the way.
3. When ''DISC LOAD'' appears in
the display, insert the next disc
into the slot.
4. Repeat this until all six positions
are loaded. The system will then
begin playing the last disc loaded.
Table Of Contents
Audio System (Models without Navigation System)
If you stop loading discs before all
six positions are filled, the system
will wait for 15 seconds, stop the load
operation, and begin playing the last
disc loaded.
To load a single disc:
1. Press and release the LOAD
button.
The disc number for an empty
2.
position is highlighted and the
green load indicator comes on.
When you see ''LOAD'' in the
display, insert the disc into the slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way.
If you press the LOAD button while
a disc is playing, the system will stop
playing that disc and start the
loading sequence. It will then play
the disc just loaded.
2008 TL
Playing a Disc
Select the disc changer by pressing
the DISC/TAPE button. The system
will begin playing the last selected
disc in the disc changer. You will see
the disc and track numbers
displayed.
To select a different disc when all six
positions are loaded, press the
corresponding number on the preset
buttons.
CONTINUED
147