Siemens CN878G4 6B Series User Manual And Installation Instructions page 17

Hide thumbs Also See for CN878G4 6B Series:
Table of Contents

Advertisement

Press
⁠ .
1.
Use the rotary selector to reset the timer duration to
2.
zero.
Press
to confirm.
3.
10.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: The type of heating and a temperature
or setting have been set.
Press
⁠ .
1.
a The time-setting options menu opens.
Use the rotary selector to set the cooking time.
2.
Rotation direction
Left
Right
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments. The end time is calculated automatically.
Press
to start the operation.
3.
a The appliance starts to heat and the time starts to
count down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. "Finished" appears in the status bar.
Once the cooking time has elapsed:
4.
Press
to silence the audible signal manually.
To set another cooking time, press
the rotary selector to set the cooking time.
To continue without setting a cooking time, press
⁠ .
When the food is ready, press
appliance off.
Changing the cooking time
You can change the cooking time at any time.
Press
⁠ .
1.
Use the rotary selector to change the cooking time.
2.
Then press
twice.
3.
Cancelling the cooking time
You can cancel the cooking operation time at any time.
Press
⁠ .
1.
Use the rotary selector to reset the cooking time to
2.
zero.
To continue without setting a cooking time, press
3.
⁠ .
The type of heating and temperature settings are
shown in the display.
11  Steam
Food can be cooked particularly gently using steam.
You can use the special types of steam heating, or use
steam assistance with certain types of heating.
WARNING ‒ Risk of scalding!
Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the tem-
perature.
Open the appliance door carefully.
Keep children at a safe distance.
Default value
10 minutes
30 minutes
and use
to switch the
10.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve good cooking results, do not
delay the end time once the appliance is operating.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ The type of heating and a temperature or setting
have been set.
¡ A cooking time is set.
Press
⁠ .
1.
Press
⁠ .
2.
To set a later end time, turn the rotary selector.
3.
Press
to start the operation.
4.
a The status bar shows a notification when the opera-
tion starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down in the status bar.
a Once the cooking time has elapsed, an audible sig-
nal sounds. A notification appears in the status bar.
Once the cooking time has elapsed:
5.
Press
to silence the audible signal manually.
To set another cooking time, press
the rotary selector to set the cooking time.
To continue without setting a cooking time, press
⁠ .
When the food is ready, press
appliance off.
Cancelling the end time
The set end time can only be changed when the oven
is in standby mode.
Press
⁠ .
1.
a The time-setting options menu opens.
Press
⁠ .
2.
Use the rotary selector to reset the end time to zero.
3.
a The appliance starts to heat and the time starts to
count down.
Changing the end time
The set end time can only be changed when the oven
is in standby mode
Press
⁠ .
1.
a The time-setting options menu opens.
Press "
end".
2.
Turn the rotary selector to change the end time.
3.
Press
to resume operation.
4.
Steam en
and use
to switch the
17

Advertisement

Table of Contents
loading

Table of Contents