Page 1
Scope of Supply/Bill of Material & Mounting Drawings Part Number: H-CB500X-04-01-AL / H-CB500X-04-02-AL Part Description: Rack – HONDA CB500 X Installation / Parts List / Bill of Material for Mounting Copyright By SRC Design and Specification are subjected to change...
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
Before starting to mount the Rear Rack, we have to unscrew the Mounting bolts (as shown) of the Side Panel on both sides. Since, SRC Rear Rack Mounting Brackets (LH & RH) takes the same mounting as that of the Side panel; it is the first step in the Mounting process The drawing shown here, is the “As is...
Page 4
Nuts (M6) (8) – 4 off and tighten it to the torque as shown in the BOM table Rear Rack as shown “Final Assembled condition” Copyright By SRC Design and Specification are subjected to change Page 4...
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.