Step 1:
Before starting to mount the Rear Rack,
we have to unscrew the Mounting bolts
(as shown) of the Side Panel on both
sides. Since, SRC Rear Rack Mounting
Brackets (LH & RH) takes the same
mounting as that of the Side panel; it is
the first step in the Mounting process
Copyright By SRC
Design and Specification are subjected to change
The drawing shown here, is the "As is
dismounted condition of the Side
panels"
Step 2 & 3:
Orient and align the Bracket LH (2) and
Bracket RH (4) in-line with the Side Panel
mounting holes, and bring the Side panels
exactly in-line with them, and slip-in the
Mounting bolts (2 off) on each side and
secure the threads
Page 3