External Covers - Canon STAPLER STACKER SS-72 Service Manual

B. External Covers
1. Tray unit
1) Remove the slide guide unit.
2) Unhook the 2 claws and then remove
the stoppers (right and left).
Slide guide unit Stoppers
Figure 3-2-2
3) Following the rear cover removal proce-
dure described on Page 3-4, remove the
rear cover.
4) Remove the screw and the connector.
Then, lift up the tray unit to remove.
Screw Connector
Tray unit
Figure 3-2-3
2. Top cover unit
1) Open the top cover unit.
2) Unhook the 2 claws, and then remove
the top cover unit.
Claws Top cover unit
Figure 3-2-4
3. Right top cover
1) Following the rear cover removal proce-
dure described on Page 3-4, remove the
rear cover.
2) Open the top cover unit.
3) Open the right cover unit.
4) Unhook the 2 claws, and then lift up the
right top cover to remove.
Claws Right top cover
Figure 3-2-5
CHAPTER 3
3 - 3