JABLOTRON FUTURA
13 13. . Maintenance
Maintenance
The basic maintenance of the heat recovery unit consists of regular filter change and condensate drain checks. Regular filter change performed
once every 2 - 6 months (depending on the local outdoor air quality) is essential for correct and trouble-free operation of the heat recovery unit.
Check the condensate drain at least once a year and remove any dirt.
W e r ec ommend to c hec k uni t's suppl y and exhaust duc ts (f aç ade box, gr i d, etc .) at l east onc e a y ear (or mor e
W e r ec ommend to c hec k uni t's suppl y and exhaust duc ts (f aç ade box, gr i d, etc .) at l east onc e a y ear (or mor e
f r equentl y dependi ng on the l oc al outdoor ai r qual i ty ).
f r equentl y dependi ng on the l oc al outdoor ai r qual i ty ).
Pl ease make sur e that the uni t i s di sc onnec ted f r om the el ec tr i c al mai ns bef or e pr oc eedi ng wi th mai ntenanc e.
Pl ease make sur e that the uni t i s di sc onnec ted f r om the el ec tr i c al mai ns bef or e pr oc eedi ng wi th mai ntenanc e.
To meet the conditions of the f i ve- y ear war r anty
important to perform the following tasks:
Functionality before the
inspection
Heat exchanger status
Inspection of wiring
Condensate drain
Piping
Filter clogging
Air flow regulation
25/43
f i ve- y ear war r anty , it is necessary to perform a regular annual service inspection. During the inspection it is
I n d iv id u a l t a s k s of s erv ice in s p ect ion a n d t h eir d es crip t ion
I n d iv id u a l t a s k s of s erv ice in s p ect ion a n d t h eir d es crip t ion
- check that the unit is running and which mode is set
- turn the unit off from the control panel or via MyJABLOTRON application
- unplug from electrical mains
- remove front cover (2 × screw)
- dismount filter plugs and remove them
- remove plugs A, B, C, D with a spatula of minimal width of 5 cm (2 in)
- check the heat exchanger visually
- clean first half of valve rails with clean, dry cloth
- plug in, wait for the valves to pass, unplug again
- clean second half of valve rails, plug in
- check operation of the actuators and movement of all valves to their end positions
- use vacuum cleaner to clean any remaining dust or dirt
- check tightness of contacts
- plug in
- check connection and operation of control panels
- check functionality of all buttons and other peripheries
- clean the drain
- if necessary, optionally rinse with clean water and fill odor trap with water
- check that the façade box is clean
- check outdoor supply and exhaust pipes
- check connection of silencers to the unit and the distribution boxes
- check the connection of the flexi pipe to the distribution boxes
- check filter clogging in %
- if necessary, change filters and run initialization
- offer the client to sell them annual supply of filters
- adjustment of control valves
- check the locking in the set position
- check settings of the distribution elements
- go through the settings with the client and in case he or she has any requirements for adjustments,
adjust the settings accordingly
INSTALLATION MANUAL
JABLOTRON LIVING TECHNOLOGY