jablotron Futura Installation Manual page 16

JABLOTRON FUTURA
ventilation level is a read-only value. When the air volume for a ventilation level is changed, Futura recalculates the pressure loss for this
ventilation level.
When the Overpressure or Radon Protection functions are activated (only one of them can be active at a time), the factor of fan power changes.
The factor is set as a percentage.
E xampl e: Overpressure is set on 120 % - this means that the supply fan runs at 120 % of the extract fan speed. E xampl e:
7 7 . . Online registration Online registration
When registering the uni t must be c onnec ted to the i nter net the uni t must be c onnec ted to the i nter net . When the unit is on, it logs into the preset server and maintains a
permanent connection.
Log in to MyCOMPANY, run device registration and enter the uni t r egi str ati on key
in app. Next, optionally enter "Service Name", the customer's email address, and the time zone. Tap "SEND" to submit the registration and
complete the process.
Make sure "Loc ati on ser vi c es" ar e enabl ed "Loc ati on ser vi c es" ar e enabl ed when installing a new unit!
If the unit is not online, the following screen will be displayed and the following will need to be confirmed.
Figure 17 – Entering registration key, Figure 18 – Registration of the device, Figure 19 – Confirmation of other parameters
14/43
Figure 16 – Registration key
uni t r egi str ati on key either manually or by scanning barcode using camera
INSTALLATION MANUAL
JABLOTRON LIVING TECHNOLOGY