Interior Lighting - Skoda KUSHAQ 2021 Owner's Manual

38 Lighting, windscreen wipers and washers ›
Tail light assembly
Loosen and remove the light
Replacing the light bulb
NOTICE
Risk of damage to the electrical system!
Make sure that no cables are trapped when insert-
▶
ing the holder into the lamp.
Insert and fix the light
›
Insert the connector into the light until it clicks into
place.

Interior lighting

›
Unscrew the screws
.
A
›
Remove the light.
›
Press the lock mecha-
nisms on the connec-
tor and remove the
connector.
›
Unlock and remove the
lamp holder .
A
›
Change the bulb in the
socket.
›
Check whether plug
A
is securely connected.
›
Insert the bulb holder
into the light and snap
into place.
›
Insert the pins of the light into the openings
A
in the body.
NOTICE
Risk of damage to the electrical system!
Make sure that the lines between the lamp and the
▶
body are not pinched when the lamp is inserted.
›
Screw the light into place.
Interior lighting
Operation
Switching on automatically
The lighting switches on when one of the following
events occurs.
The vehicle is unlocked
▶
One of the doors is opened
▶
The ignition key is removed (vehicle without start-
▶
er button)
Automatic switch off
The lighting switches off when one of the following
events occurs:
The vehicle is locked
▶
The ignition is switched on
▶
About 30 seconds after all the doors have been
▶
closed
Operation of the lighting
Middle
position
Automatically switch on and switch off
of the
switches
Turn the front and rear lights on/off
Deactivation of automatic activation
Reading lamp left
Reading lamp right
If a door remains open and the ignition is switch-
ed off, the lights will turn off automatically after 10
minutes.
B