Skoda KUSHAQ 2021 Owner's Manual page 39

Insert a new bulb
›
Fit the protective cap on the headlight again.
Fog lights
To reach the light bulb, the wheel housing shell must
be loosened.
Loosen the wheel housing shell
Replacing the light bulb
Lighting, windscreen wipers and washers ›
›
Remove the defective
bulb.
›
Insert the new bulb in-
to the headlight so
that the flattened side
of the socket is
A.
pointing up.
›
Attach the connector
to the bulb.
›
Fold the spring bracket
on the bulb and hook it
in.
›
Unscrew the screws
.
A
›
Fold down the wheel
arch shell.
the corresponding openings in the headlight.
›
Turn the bulb clockwise
›
Replace the rubber protective cap on the headlight.
Secure the wheel arch liner
›
Reinstalling the wheel arch liner.
Replace light bulbs 37
›
Remove the rubber
protective cap from
the headlight.
›
Turn the bulb and re-
move it.
›
Release the connector
and remove it from the
bulb.
›
Insert the plug into the
new bulb until it clicks
into place.
›
Insert the new bulb in-
to the headlight so that
the guide lugs on the
bulb are aligned with
to secure.
›
Screw in the screws
.
A