EAW Cinema CB523M Technical Specifications

Technical Specifications CB523M
INDICATES 3/8-16 THREADED MOUNTING HOLE
CB523M
INDICATES 5/16-18 THREADED MOUNTING HOLE
INDICATES CENTER OF BALANCE
24.43
69.41
FRONT
ACCESS PANEL
MIDRANGE DRIVER
BACK
INPUT
TOP
One Main Street, Whitinsville, MA 01588 • (508) 234-6158 • FAX (508) 234-8251 • Email info@eaw.com • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. • CB523M PUB#888125 Rev(A)/6/1/99 • Printed In USA
THX is a registered trademark of Lucasfilm, Ltd.
5.21 24.31 (POSITION 1)
20.82 (POSITION 2)
17.00 (POSITION 3)
25°
HK523M,
EAW #999826
BRACKET,
EAW #606098
3.66
INPUT
15.88
BV253C,
EAW #999418
39.50
17.75
RIGHT SIDE
999825 (1)
exp 11/16/98 dpm
CINEMA SERIES
APPLICATION
• Approved for use in THX®-certified theaters
• For medium-sized theaters
• Triamplified 3-way screen channel loudspeaker
PRODUCT INFORMATION
The CB523M triamplified three-way full-range screen channel loud-
speaker system has been approved for use in THX-certified theaters.
Three-way design dramatically advances cinema audio quality by
improving the naturalness and intelligibility of dialog, eliminating
distortion from excessive driver excursion and extending pattern
control into the lower octaves.
The two component system includes a BV253C dual 15-in low
frequency enclosure and an HK523M mid/high section.
The low frequency enclosure uses optimally tuned enclosure venting
to increase LF response while limiting driver excursion. This method
produces less distortion and minimizes driver strain while extending
LF response to the lowest octaves. The enclosure's shallow dimen-
sion allows convenient placement behind the screen.
The HK523M MF/HF section features a horn-loaded 10-in cone and
a high power 1.4-in exit compression driver loaded with a 90° x
45° coverage pattern constant directivity horn.
The adjustable steel bracket attaching the MF/HF section to the LF
enclosure can be positioned at one of three mounting points for
optimum front/rear placement. The bracket allows the MF/HF
section to be aimed independently of the LF section in both the
horizontal and vertical planes and can be locked once it is posi-
tioned.
Input connectors for the LF and MF sections are two-terminal barrier
strips that accommodate bare wire, tinned leads or spade lugs. Bind
posts for the high frequency section are located directly on compres-
sion driver. The input panels are located on the sides and top of the
enclosures for convenient access in cramped installation areas.
All external components feature a textured black finish to eliminate
the reflection of light through perforated cinema screens.