Responsive Swing Effects For Neopixel - SaberTec Golden Harvest v3 Manual

- me_responsive=1: The area of the tip that simulates the melting and its color are changed
- me_responsive=2: The area of the tip that simulates the melting and its color are changed
- me_responsive=3: The area of the tip that simulates the melting and its color are changed
- me_tilt_speed=100: Defines the sensitvity of tilting the saber.
- me_twist_speed=100: Defines the sensitvity of twisting the saber.
Responsive Blaster Block
For the blaster block effect, you can decide on your own if the blaster blok location is chosen randomly
or affected by gestures in real time. The responsive blaster block allows for the location of the blaster
block to change by tilting the saber, by twisting it or by both tilting and twisting it. You can choose on
your own which of both gestures should be used.
There are three parameter in the "background.txt" file that control the responsive blaster block
feature. In the following, these parameters are described:
- bb_responsive=0: The responsive blaster block feature is disabled. The position of the
- bb_responsive=1: The position of the blaster block is changed by tilting the saber.
- bb_responsive=2: The position of the blaster block is changed by twisting the saber.
- bb_responsive=3: The position of the blaster block is changed both by tilting the saber and
- bb_tilt_speed=100: Defines the sensitvity of tilting the saber.
- bb_twist_speed=100: Defines the sensitvity of twisting the saber.

Responsive swing effects for Neopixel

It is possible to customize the swing color and the swing light effects for Neopixel so that they respond
to the swing speed in real-time. The faster the swinging of the blade, the more pronounced the swing
color and the swing light effects are. The basic blade color and the basic blade light effects are blended
with the swing color and the swing light effects, whereby the mixing ration moves towards the swing
color and the swing light effects as the swing speed increases. The parameters that define the
responsive swing effects are described in the following:
- sw_motion_sensitive=0: If this parameter is set to 0, the responsive swing color and swing light
- sw_min_threshold=1000: Minimum swing speed at which the basic blade color and the basic blade
by tilting the saber.
by twisting the saber.
both by tilting the saber and by twisting it.
blaster block is chosen randomly.
by twisting it.
effects are disabled. If it is set to 1, they are enabled.
light effects start to blend with the swing color and the swing light
effects. Below this swing speed, the blade only displays the basic blade
color and the basic blade light effects.
78