Please read this guide before using your saber equipped with a Golden Harvest v3 for the first time. It
describes the menu navigation, but gives also important information on how to charge your saber
properly for example.
Menu Navigation
The default
menu navigation for a single momentary button is shown below. For alternative
navigation layouts, please check the manual of the Golden Harvest v3 which can be found on
https://sabertec.net/downloads/. The color changing features are only available for Hero sabers.
FUNCTION
Power On
Enter Effect Menu
∟ Change Blade Profile*
∟ Change On Top Effect*
∟ Save And Leave
Enter Accent Menu
∟ Change Standby Accent Profile*
∟ Enter Ignited Accent Submenu
∟ Change Ignited Accent Profile*
∟ Save And Leave
Enter Color Change Menu
∟ Cycle Through Preset Color
Profiles
∟ Save And Leave
Enter Lockup Mode
∟ Leave Lockup Mode
Enter Drag Mode
∟ Leave Drag Mode
Enter Melt Mode
∟ Leave Melt Mode
Blaster Block
Force Push
Activate Power Saving
Deactivate Power Saving
Power Off
Enter Sound Font Menu
∟ Go To Next Sound Font*
Quick User Guide
TRIGGERING WITH ONE MOMENTARY SWITCH
Tap the button
Hold the button, then hold it again. Point the saber
upwards while doing this.
∟ Slowly twist the saber
∟ Tap the button
Hold the button until the confirmation sound is played
Hold the button, then hold it again. Point the saber
downwards while doing this.
∟ Tap the button
∟ Hold the button for 1 s
∟ Tap the button
Hold the button until the confirmation sound is played
Hold the button, then tap it. Point the saber upwards
while doing this.
∟ Slowly twist the saber
Hold the button
Hold the button, release it and then twist the saber. Point
the saber upwards while doing this.
Tap the button
Hold the button, release it and then twist the saber. Point
the saber downwards while doing this.
Tap the button
Hold the power button, release it and then perform a stab
Tap the power button
Tap the button
Hold the button while swinging the saber
Hold the power button while performing a stab
Hold the power button while performing a stab
Hold the power button until the saber shuts down
Hold the button before the blade is ignited, then release
it. Point the saber upwards while doing this.
∟ Slowly twist the saber