Activating Or Deactivating The Brush Head Replacement Reminder - Philips Sonicare DiamondClean Smart HX993W Manual

c. Brush head replacement reminder
d. Brushpacer
3
4
35_021_1899_2_DFU-Luxury_A6_v1.indd 19
Your Philips Sonicare is equipped with a smart
feature that tracks the wear of your brush head.
Depending on the pressure you apply and the
amount of time used, the brush head replacement
reminder light reminds you to change your brush
head. It is important to change your brush head in
time in order to guarantee the best cleaning & care
of your teeth.
When the amber brush head replacement light
starts blinking, you should replace your brush
head.
Activating or deactivating the brush head
replacement reminder
1 Place the handle in the plugged-in charger.
2 Brush head replacement reminder is enabled
by holding the mode/intensity button and by
pressing the power button three times while
on the charger. The handle will beep twice to
con rm it is enabled.
3 Brush head replacement reminder is disabled
by holding the mode/intensity button and by
pressing the power button three times while
on the charger. The handle will beep once to
con rm it is disabled.
2
The brushpacer is an interval timer that has a
short beep and pause to remind you to brush the
1
di erent sections of your mouth. Depending on the
brushing mode you have selected (see ‚Brushing
6
modes'), the brushpacer beeps at di erent
5
intervals during the brushing cycle.
19
English
22/03/17 09:36