Zanussi ZOCNX3WL User Manual page 23

Step 5 Set the temperature: 250 °C.
Duration: 1 h
Step 6 When the oven is cold, clean the cavity with a wet soft cloth.
HOW TO REMOVE AND INSTALL: DOOR
The oven door has two glass panels. You can
remove the internal glass panel to clean it.
CAUTION! Do not use the oven
without the glass panels.
Step 1 Press the buttons at the sides of the
door trim (A) on the upper cover and
pull it upwards to remove it.
Step 2 Hold the inner glass B tightly with
both hands and slide it upwards to
remove it from its initial position.
Make sure that you tightly hold glass
B to prevent the glass from falling.
Step 3 Clean the door with a wet sponge
and rub it dry with a soft cloth. Do
not use steel wool, acids or abrasive
cleaning agents because they can
damage the surface.
When the oven door is clean, install the glass panel in the opposite sequence. The screen-printing
zone must face the inner side of the door. Make sure that after the installation the surface of the glass
panel frame on the screen-printing zones is not rough when you touch it. Make sure that you put the
glass panel in the rubber distance holders.
Clean the oven with catalytic cleaning
The direction in which you open the
door depends on your oven model.
You open the door from the right side
in some models and from the left side
in others.
A
B
23