Subscribe to Our Youtube Channel
Related Manuals for Airflow Purigo T1750
Summary of Contents for Airflow Purigo T1750
- Page 1 Installation, operation, and maintenance manual Part No. 90001461/90001462 Purigo T1750/T2200 Please keep this manual with the product...
-
Page 2: Table Of Contents
80001028 – Issue 1 10/21 Contents 1.0 General Information....................3 1.1 Safety Information ....................3 1.2 Warranty Claims ...................... 4 1.3 Regulation Guidelines ....................4 1.4 Intended Use ......................4 1.5 Receipt ........................4 1.6 Storage ........................4 1.7 Shipping ........................5 2.0 Disposal ........................ -
Page 3: General Information
Protective footwear serves to protect against heavy falling parts and from slipping on slippery surfaces. Warning: For all work on the Purigo T1750 and T2200, the applicable general safety at work and accident prevention regulations must be observed! The following must be observed before all cleaning and maintenance work or before opening the terminal compartment: All safety features like fuses, etc. -
Page 4: Warranty Claims
80001028 – Issue 1 10/21 1.2 Warranty Claims Any warranty, guarantee or offer provided by Airflow Developments shall not apply if the instructions are not observed. The use of accessories, add-ons or other interactions which are not recommended or offered by Airflow developments is not permitted. Any damage or issues that may occur from misuse, unauthorized tampering or modification with the unit is not liable for warranty. -
Page 5: Shipping
80001028 – Issue 1 10/21 1.7 Shipping All manufactured devices are shipped from the factory after all tests and checks have been carried out before shipment. The shipping must be carried out by trained and experienced personnel and the necessary safety precautions should be taken to prevent the overturning and slipping of the device. - Page 6 80001028 – Issue 1 10/21 This product requires the use of a forklift or other suitable lifting devices to be properly transported. Please do not attempt to lift the unit personally. Warning: Due to load the package must be transported by forklift, pallet truck or crane.
-
Page 7: Disposal
Metal components of the product may be recycled, always check with your local disposal outlet which parts can or can’t be recycled in your area. Airflow Developments recommends reusing and recycling wherever it is possible to reduce environmental impact. Do not reuse dirty filters. - Page 8 80001028 – Issue 1 10/21 Table 3: Technical Specification Parameter T1750 T2200 Airflow Volume min(m3/h) 1750 2200 Airflow Volume max(m3/h) Max covering area(m2) LwA (Min)(dBa) LwA (Max)(dBa) LpA(Min) @1m (dBa) LpA(Max) @1m (dBa) Power Max(W) Voltage(V) Amps(A) Frequency(Hz) 2313 2332...
- Page 9 80001028 – Issue 1 10/21 Table 4: T1750 Setting levels T1750 Adjustment levels Air Volumes(m3/h) Noise level at 1m(dBa) Power(W) 0-300 300-370 370-480 480-565 565-660 660-740 740-850 950-935 935-1025 1025-1110 1110-1220 1220-1305 1305-1400 1400-1480 1480-1590 1590-1680 1680-1750 Table 5: T2200 Setting levels T2200 Adjustment levels Air Volumes(m3/h)
-
Page 10: Installation
80001028 – Issue 1 10/21 4.0 Installation Section 4 contains information about the installation of the product into its intended area of operation. It contains information about the installation location, mobility, electrical connection, and unboxing. 4.1 Unboxing The product will come in a wooden structure and packaged which can be disposed of and recycled. - Page 11 80001028 – Issue 1 10/21 The required minimum distances to the walls depend on the physical conditions of the installation space, but to maintain good air circulation, the distances listed below should be considered. Table 6: Clearance for free airflow. Model A(mm) B(mm)
-
Page 12: Mobility
80001028 – Issue 1 10/21 4.3 Mobility The Purigo T series has feet at the base of the unit which provide stability and can be individually raised or lowered in order to level the unit. 4.4 Electrical Connection The electrical connection is made by plugging in the power cable to the side of the unit and inserting the plug into a mains power socket. -
Page 13: Operation
The adjustment levels with power draw and airflow rates can be seen in section 3.0, Table 3 and 4 of this document. Comfort is intended to be the everyday operating speeds, and boost for short periods of increased purification... -
Page 14: Maintenance And Service
6.1 Important safety information Please read and understand this section fully before continuing with maintenance work. (Continuation on page 15) Airflow Developments recommends the following safety equipment be used before carrying out work. • Protective glasses to protect against eye injuries. -
Page 15: Maintenance Schedule
80001028 – Issue 1 10/21 6.2 Maintenance Schedule The below maintenance schedule is recommended by Airflow Developments. Table 7: Maintenance and replacement schedule Recommended inspection Maintenance Plan for all Purigo units intervals Action if Component Task unacceptable Regularly months months... -
Page 16: Components
80001028 – Issue 1 10/21 6.3 Components Each component should be checked for damage. Below is a list of all the components within the unit. Common symptoms include loose wires, dents, scratches, or other damages. Component Description Supply Outlet Back Panel Unit Frame Silencer Unit Door... -
Page 17: Filters
FFP2) BEFORE performing service and/or maintenance work to prevent the inhalation of built-up harmful particles inside the filter. Consult section 6.1. The filters are available for purchase from airflow.com. The filters are only guaranteed if purchased from Airflow developments. No responsibility will be accepted for use of 3 party filters or other filters. -
Page 18: Silencers
80001028 – Issue 1 10/21 6.5 Silencers To maintain and replace the silencer follow the step-by-step guidance below: 1. Use the key supplied with the unit to unlock the 3 locks and use the handle to open the door. The silencers are located as according to the below diagram: 2. - Page 19 80001028 – Issue 1 10/21 Airflow Developments Limited Email: info@airflow.com Aidelle House, Lancaster House Telephone: +44(0)1494 525252 Cressex Business Park, High Wycombe Facsimile: +44(0)1494 461073 Buckinghamshire, HP12 3QP, UK ©Copyright 2016. Airflow Developments Ltd...
Need help?
Do you have a question about the Purigo T1750 and is the answer not in the manual?
Questions and answers