Transferring Audio Data From Your Computer To The Network Walkman - Sony MZ-NH1 SonicStage v2.0 Operating Instructions Manual

Transferring audio data from your computer to the
Network Walkman
Audio data stored in My Library of SonicStage can be transferred to your Network
Walkman an infinite number of times.
The My Library
list
1
Connect your Network Walkman to the computer.
After making the connections, "Network Walkman" is displayed in the Transfer
Destination list on the upper right of the screen.
For details about connections, refer to the instruction manual of your Network
Walkman.
When using a device supporting "MG Memory Stick", insert the MagicGate-
compatible "Memory Stick" media into the device before connecting to the computer.
Do not remove the USB cable, battery, or "Memory Stick" before the transfer has
completed.
2
Select the device/media for transfers ("Network Walkman (Internal)*" or
"Network Walkman (Memory Stick)*") from the Transfer Destination list on
the right side of the screen and click [Transfer].
Select "Network Walkman (Internal)" to transfer to the built-in flash memory or select
"Network Walkman (Memory Stick)" to transfer to a "Memory Stick".
The screen is switched to the Transfer (Network Walkman) screen.
3
Click the tracks you want to transfer in the My Library list on the left side of
the screen.
To transfer more than one track, hold down the [Ctrl] key while selecting the tracks.
To transfer all tracks of the album, click the album.
10
Transfer Destination list
[Transfer]
[Transfer Mode]