Compressor Assembly - TJM Pro Series Installation And User Manual

TJM Pro Series Twin Compressor: Installation and User Manual
The 12 V solenoid shown is supplied with the TJM Pro Locker. The ¼" BSPT hose fitting shown is supplied
with the TJM Airline Kit, TJM Bulkhead Fitting Kit, TJM Fascia Panel Mount Kit or Bulkhead Fittings kits
which can be purchased separately.
1/8" BSPT
For product warranty please refer to our website www.tjm.com.au
File: F-31070

2. Compressor Assembly

Accessory Installation
1/4" BSPT
Page 6 of 23
o Determine the desired mounting
configuration for the compressor accessories
and select the desired outlet ports, there are
9 available outlet ports in total.
o If mounting in a confined space, mounting
may be easier if outlet fittings and accessories
are installed prior to mounting the air
compressor.
o To fit the Pro-Locker solenoids, remove one of
the ⅛" BSPT plugs in the air tank using a 5mm
hex key.
o To fit the TJM Airline Kit, remove one of the
¼" BSPT plugs in the air tank using a 6 mm
hex key.
23/02/2021