Time Settings; Screen Settings; Service Menu; Factory Settings - Tech Controllers EU-L-4 WIFI User Manual

8.2.

TIME SETTINGS

The current time and date are automatically downloaded from the network. The user can switch the synchronization to
manual mode.
8.3.

SCREEN SETTINGS

These parameters enable the user to customize the screen settings to satisfy individual needs. The user may choose the
data to be displayed in the main screen view

WiFi – the screen shows the network name and the signal strength.

Zones – the screen shows current and pre-set parameters in particular zones.

Additional contacts – the screen shows the status of additional contacts controlled using weekly control mode.
Apart from that, the user may adjust:

the display contrast

the screen brightness

the blank screen brightness

the time of inactivity after which the screen blanking is activated.
8.4.

SERVICE MENU

In order to access service functions it is necessary to enter a four-digit code provided by TECH.
8.5.

FACTORY SETTINGS

Once the <Factory settings> option is activated, all customized settings are lost and replaced with the manufacturer's
settings.
9.

SOFTWARE VERSION

When this option is selected, the display shows the manufacturer's logo and the controller software version.
:
16