Page 7
Step1: Take out the packaging tube(68), bolts(16) and washerss(17) from main frame(13) by wrench(65), please keep bolts(16) and washerss(17) for step 2.
Page 8
Step 2: #8 d8 8PCS #65 S13-14-15 1PC Take out the bolts(16), spring washers(8) and washers(17) by wrench(65), then attach front bottom tube(15) and rear bottom tube(26) on the main frame(13) with wrench(65), bolts(16), spring washers(8) and washers(17).
Page 9
Step 3: a.Take out bolts(9), spring washers(8) and arc washers(7) from main frame(13) by wrench(66). b.Put cover of handlebar post join (10) into handlebar post join(5), connect trunk wire 1(4) and trunk wire 2(12) well; connect handle pulse wire 2(3) and handle pulse wire 1(22) well.
Page 10
Step 4: a.Attach pedal(14L/R) to main frame (13) by wrench(65). b.Take out bolts(43), spring washers(41) and arc washers(46) from adjusted handlebar (47) by wrench(67), then attach adjusted handlebar(47) to adjusted shaft(44)by bolts(43) , spring washers(41) and arc washers(46) .
Page 11
Step 5: a.Take out bolts(69), spring washers(8) and washers(17) from supporting shoe for seat(35) by wrench(66), then attach assembly of saddle frame(60) to supporting shoe for seat(35) with wrench(66), bolt(69), spring washers(8) and washer(17). b.Take out bolts(9), washers(17) from seat(62) by wrench(66), then attach seat(62) to assembly of saddle frame(60) with wrench(66), bolts(9) and washers(17) .
Page 12
Step 6: #51 M8*H16*S13 2PCS #55 M8*47*20*H5 2PCS #17 d8*§ ¶ 2 0*2 2PCS #40 d6*§ ¶ 1 2*1.2 4PCS #63 M6*40 4PCS #41 d6 4PCS #8 d8 2PCS a.Take out bolts(63), spring washers(41) and washers(40) from back cushion(64) by wrench(65);...
Page 13
Step 7: #9 M8*16*S6 2PCS Φ #7 d8* 20*2*R30 2PCS #65 S13-14-15 1PC #8 d8 2PCS #2 M5*10 4PCS #66 S6 1PC a.Connect wire of computer (1a) and trunk wire 1(4) well; connect wire of computer(1b) and trunk wire2(3) well. b.Take out bolts(2) from the back of computer(1), then attach computer(1) to handlebar post join(5) with wrench(65) and bolts(2).
Adjust the handle: Adjust the seat to a suitable location, pull up adjusted handlebar(47) to horizontal position, then lock. The seat could be moved in the horizontal direction when underdraught adjusted handlebar (47) and put foot on the pedal .
Page 15
Instruction Manual for Exercise Monitor Power on The full LCD display will be shown with a long beep at the same time after the monitor is power on, after that entering the user of selection mode. Note : when the no signal is input about 256 Sceonds, it will be in sleep mode. Press any key to return the display. Select the user There are fiver user can be selected.
MANUAL Use the UP or DOWN button to select “MANUAL”, and press the MODE button to select TIME , DIST, CAL, THR to preset. When select this value, this data will flash and press the UP or DOWN button can adjust. After that pressing the MODE button to confirm this setting value.
Page 17
SETTING THE USER PROGRAM DATAS Use the UP or DOWN key to select “USER”, press the MODE button and the first loading will flash and press the UP or DOWN button to adjust the level. After that pressing the MODE button to confirm and move to next loading continue for all 20 loading (The user can adjust the level of loading by pressing the UP or DOWN button during training.) After that press the MODE button to select TIME or DIST or CAL and THR to preset, when select this data, this data will...
Page 18
GARLANDO SPA Via Regione Piemonte, 32 - Zona Industriale D1 15068 - Pozzolo Formigaro (AL) - Italy www.toorx.it - info@toorx.it...