Download
Share
Print this page
Garlando TOORX SRX65 EVO Instructions Manual
  1. Manuals
  2. Brands
  3. Garlando Manuals
  4. Exercise Bike
  5. TOORX SRX65 EVO
  6. Instructions manual

Garlando TOORX SRX65 EVO Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
INSTRUCTION

Advertisement

loading

Related Manuals for Garlando TOORX SRX65 EVO

Summary of Contents for Garlando TOORX SRX65 EVO

  • Page 1 INSTRUCTION...
  • Page 2 EXPLOSIVE...
  • Page 3 PART NO. DESCRIPTION Computer 1 PC Computer holder 1 PC Handlebar 1 PC Hexagon screw M8 4 PCS Spring washer φ8 4 PCS I-pad holder 1 PC Brake knob 1 PC Hexagon nut M8 1 PC Brake cover 1 PC Screw M5 1 PC Brake nylon bushing...
  • Page 4 PART NO. DESCRIPTION Pedal(R +L) 1 SET Crank plug 2 PCS Flange nut M10 2 PCS Crank(R+L) 1 SET Crank bushing 1 PC Hexagon nut 2 PCS Bearing 2 PCS Bushing 1 PC End cap 4 PCS Hexagon nut M10 2 PCS Rear tube 1 PC...
  • Page 5 PART NO. DESCRIPTION Frame 1 PC Screw M5 2 PCS Brake pad 1 PC Hexagon nut M5 2 PCS Nylon cap M5 2 PCS Screw 1 PC Brake shrapnel 1 PC Knob 2 PCS Cable 1 PC Flange nut M12 2 PCS Trim cover(R+L) 1 SET...

  • Page 6: Assembly Instruction

    ASSEMBLY INSTRUCTION STEP 1 Attach the rear tube (38) to the main frame(55) using two step screw(54) and hexagon wrench(77). Attach the front tube (53) to the main frame same as the rear tube.
  • Page 7 STEP 2 Put seat post (25) insert main frame with knob(62) adjust height. Fix slider(20) to seat post by carriage screw(22),washer(15) and knob(24).And then fix seat(21) to slider by harpoon wrench(78). Fix bottle holder(19) on main frame by two screws(18) and harpoon wrench.
  • Page 8 STEP 3 Put handlebar post (79 )insert main frame with knob(62) adjust height. Fix handlebar(3) on handlebar post by spring washer(5) ,hexagon screw(4) and hexagon wrench(77). Fix arm pad(73) on handlebar by screw(76) and fix i-pad holder on handlebar by screw(10). Fix computer(1) on the handlebar by computer holder(2) and screw(60).And insert the sensor cable plug(17) into the sensor joint of computer.
  • Page 9 STEP 4 The pedals (28L and 28R) are marked “L” and “R”-left and right. Connect them to their appropriate crank set. The right crank set is on the right hand side of the cycle as you sit on it. Note that the right pedal should be threaded on clockwise and the left pedal on anti-clockwise.

  • Page 10: Key Guide

    EXERCISE MONITOR INSTRUCTION MANUAL HOW TO REMOVE BATTERY: 1. Pull off the battery cover and place one of CR2032 3V battery into battery housing on back of monitor, please refer to below illustrations. 2. Insure batteries are correctly positioned and battery springs are in proper contact with batteries.
  • Page 11 RPM: Displays your workout RPM. The monitor will display the current RPM from 15 ~ 999 DISTANCE: press the button of ENTER to DIS function and press the UP or DOWN button to enter the value you want. Count up: Without setting the distance value, the monitor will count up the distance from 0.1~999.0Km or Mile Count down:...
  • Page 12 GARLANDO SPA Via Regione Piemonte, 32 - Zona Industriale D1 15068 - Pozzolo Formigaro (AL) - Italy www.toorx.it - info@toorx.it...