Locating The Serial Number And Product Number; Setting Up The Monitor - HP M27fd User Manual

Hide thumbs Also See for M27fd:
Table of Contents

Advertisement

Table 1-6
Rear components and their descriptions
Component
(1)
Security cable slot
(2)
Power connector
(3)
Power light
(4)
USB connectors (2)
(5)
USB Type-C port
(6)
VGA port
(7)
HDMI ports (2)

Locating the serial number and product number

Depending on the product, the serial number and product number are located on a label on the rear of the
monitor or on a label under the front bezel of the monitor head. You might need these numbers when
contacting HP for support.

Setting up the monitor

This section describes attaching the monitor stand or wall mount and the options for connecting your monitor
to a PC, notebook, gaming console, or similar device.
WARNING!
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the web at http://www.hp.com/ergo.
IMPORTANT:
panel can cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will
not recover to its normal condition.
IMPORTANT:
the control buttons, position the monitor facedown on a flat surface covered with protective sheet foam or a
nonabrasive cloth.
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the
To prevent the screen from getting scratched, defaced, or broken and to prevent damage to
Description
Connects an optional security cable.
Connects an AC adapter.
On: The monitor is on.
Off: Depending on your monitor model, the monitor is off or in Sleep mode.
Connect USB devices.
IMPORTANT:
If you use a VGA, DisplayPort, or HDMI cable for the video signal, you must
also connect a USB Type-C to USB Type-C cable between the monitor and the source
device to provide the upstream connection to enable the monitor hubs on the connected
host device.
Connects a USB Type-C cable to a source device such as a computer or game console.
Provides video display, data transfer, and (for select products) charges small devices
when the computer is on or in Sleep state.
Connects the VGA cable to a source device such as a computer or game console.
Connect the HDMI cable to a source device such as a computer or game console.
Setting up the monitor
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2h3z1aa

Table of Contents