Related Manuals for HP M24fd
Summary of Contents for HP M24fd
- Page 1 Maintenance and Service Guide M24fd model M75605 M27fd model M31383 SUMMARY This guide provides information about spare parts, removal and replacement of parts, diagnostic tests, problem troubleshooting, and more.
- Page 2 Company, L.P. AMD is a trademark of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. NVIDIA is a trademark and/or registered trademark of NVIDIA Corporation in the U.S. and other countries. USB Type-C and USB-C are registered trademarks of USB Implementers Forum.
-
Page 3: Table Of Contents
Table of Contents 1 Getting started ................................1 Important safety information ..........................1 Important service information and precautions ....................1 RoHS (2002/95/EC) requirements .......................... 2 General descriptions .............................. 2 Firmware updates ..............................2 Before returning the repaired product to the customer ..................2 2 Monitor features ................................ -
Page 4: Getting Started
Getting started Read this chapter to learn about safety information and where to find additional HP resourcs. Important safety information Carefully read the cautions and notes within this document to minimize the risk of personal injury to service personnel. The cautions and notes are not exhaustive. Proper service methods are important to the safe, reliable operation of equipment. -
Page 5: Rohs (2002/95/Ec) Requirements
Level 2: Circuit board or standard parts replacement Firmware updates Firmware updates for the monitor are available at support.hp.com. If no firmware is posted, the monitor does not need a firmware update. Before returning the repaired product to the customer Perform an AC leakage current check on exposed metallic parts to be sure the product is safe to operate without the potential of electrical shock. -
Page 6: Monitor Features
For safety and regulatory information, refer to the Product Notices provided in your documentation kit. To access the latest user guides or manuals for your product, go to http://www.hp.com/support and follow the instructions to find your product. Then select Manuals. -
Page 7: Front Components
Front components To identify the components on the front of the monitor, use this illustration and table. Table 1-1: Front components and their descriptions Component Function Menu button Press to open the OSD menu, select a menu item from the OSD, or close the OSD menu. When the OSD menu is open, the Menu light turns on. -
Page 8: Rear Components
Rear components To identify the components on the rear of the monitor, use this illustration and table. Table 1-2: Rear components and their descriptions Component Function Security cable slot Connects an optional security cable. Power connector Connects an AC adapter. USB ports (2) Connect USB devices. -
Page 9: Locating The Serial Number And Product Number
The SPEC label (1) and BaRear Coverode label (2) are located on the rear of the monitor. The serial number and product number are located on a Safety label. You may need these numbers when contacting HP about the monitor model. -
Page 10: Illustrated Parts Catalog
REAR SUPPORT-L(PCR-85% ABS+5% PET/JACK BLACK (6009- 0337))(ENCORE 3-M24fd) REAR SUPPORT-R(PCR-85% ABS+5% PET/JACK BLACK (6009-0337))(ENCORE 3-M24fd) MAC. SCREW-MI M3.0*4.0L, BLK-Ni MAIN BD outer preelaboration for HP M24fd Lehui (LM238WF2- HSAK2) SHIELDING (SECC 0.5T)(1A2H-AUDIO)(ENCORE3) MAC. SCREW-MH #4-40*5.0L,Ni REAR COVER(PCR-85%+5% PET/JACK BLACK (6009-... - Page 11 11-5 SPONGE PU(80*3.0*8.0T)(BLK) MAC. SCREW-MI M3.0*6.0L, BLK-ZNNI(HEAD DIAMETER 7.0) HINGE(ENCORE3-M24f)(Sliver) GT NECK(ENCORE3-M27f)(Sliver) ASS'Y GT BASE(ENCORE3-M24f)(Sliver) GT FRONT DECO( ABS 85% PCR +5% OBP/NATURAL SILVER)(ENCORE 3-M24FD)ASS'Y 16-1 FRONT DECO(VIRGIN ABS 85% PCR +5% OBP/NATURAL SILVER)(ENCORE 3-M24FD) 16-2 LENS(PC122/TRANSPARENT)(ENCORE 3) 16-3 FOAM TAPE (L534*W3*0.6t EXP060-D33-S)
- Page 12 0337))(ENCORE 3-M27F) REAR SUPPORT-R(PCR-85% ABS+5% PET/JACK BLACK (6009-0337))(ENCORE 3-M27F) MAC. SCREW-MI M3.0*4.0L, BLK-Ni MYLAR BLACK(220*43*0.325t) (ENCORE 3-M27FD) MAIN BD ASS'Y HP Encore III M27fd (LM270WF7-HSAK2) TOP SHIELDING (SECC 0.5T)(1A2H-AUDIO)(ENCORE3) MYLAR BLACK(16.5*15*0.325t) (ENCORE 3-SHIELDING MIDDLE SCREW) MAC. SCREW-MH #4-40*5.0L,Ni REAR COVER(VIRGIN ABS+5% PET/JACK BLACK (6009-...
- Page 13 MAC. SCREW-MI M3.0*6.0L, BLK-ZNNI(HEAD DIAMETER 7.0) HINGE(ENCORE3-M27f)(Sliver) CX NECK(ENCORE3-M27f)(Sliver) ASS'Y CX BASE(ENCORE3-M27f)(Sliver) CX FRONT DECO(VIRGIN ABS+5% PET/NATURAL SILVER)(ENCORE 3-M27FD)ASS'Y 18-1 FRONT DECO(VIRGIN ABS+5% PET/NATURAL SILVER)(ENCORE 3-M27FD) 18-2 LENS(PC122/TRANSPARENT)(ENCORE 3) 18-3 FOAM TAPE (L606*W3*0.6t EXP060-D33-S)
-
Page 14: How To Order Parts
Internal and External Power Supplies are available for purchase from the following EU distributor: EET https://www.eetgroup.com/en-eu/ NOTE: HP continually improves and changes product parts. For complete and current information about supported parts for your product, go to https://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. -
Page 15: Removal And Replacement Procedures
Removal and replacement procedures Adherence to these procedures and precautions is essential for proper service. Preparation for disassembly Use this information to properly prepare to disassemble and reassemble the monitor. 1) Read the “Important safety information” and “Important service information and precautions” sections in the “Getting started”... - Page 16 Step 1 Quick release Base stand (M24fd) (1) Lay the display on soft desk and push the button of stand to unlock the stand, then pull out the stand form the monitor head. Press the white button (2) Twist out the screw and separate base and stand.
- Page 17 Step 2: Strip two screws from the Rear Cover, then move Rear Cover follow the below way Remove the screws with Screwdriver Dismantle the rear cover first from the two marked position Remove the 8pin FFC from main Remove the DECO board then remove rear cover Step 3: Strip four screws from the hinge.
- Page 18 Step 6: Strip twelve screws from the Rear Cover supporter and M/B. Step 1 Quick release Base stand (M27fd) (1) Lay the display on soft desk and push the button of stand to unlock the stand, then pull out the stand form the monitor head.
- Page 19 (2) Twist out the screw and separate base and stand. Twist out the screw Step 2: Strip two screws from the Rear Cover, then move Rear Cover follow the below way Remove the screws with Screwdriver Dismantle the rear cover first from the two marked position Remove the 8pin FFC from main board then remove rear cover...
- Page 20 Step 3: Strip four screws from the hinge. Step 4: Remove the acetate tapes from the LVDS/ LED cable. Step 5: Pull out the LVDS/ LED cable to panel. Step 6: Strip twelve screws from the Rear Cover supporter and M/B.
-
Page 21: Connector Repair
Connector repair This procedure includes HDMI, DisplayPort and audio connectors. The connectors are on the main board (board part number 5E.49101.011). The connectors identifiers are as follows: M27Fd(R352708120302) Connector Location HDMI P200/P300 P100 Type C UP100 USB Type A UP2/UP3... - Page 22 M24Fd (R352443720150) Connector Location HDMI P200 P100 Type C UP100 USB Type A UP2/UP3...
-
Page 23: Hdmi Connector P200/P300
HDMI connector P200/P300 Repair the HDMI connector: 1) Use a soldering iron and a desoldering pump to remove as much solder as possible from the pin. 2) Use a hot air gun to melt the solder on the pins. 3) Lift the P200 or P300 connector from the PCB. 4) Place the new component on the PCB. -
Page 24: Usb Type A Connector Up2/Up3
13) Place the new component on the PCB. Be sure that it matches the PCB footprint. 14) Solder the new component. USB Type A connector UP2/UP3 Repair the USB Type A connector: 15) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin. 16) Lift the UP2/UP3 connector from the PCB. - Page 25 Monitor is off. Power the power button. NOTE: If pressing the Power button has no effect, press and hold the power button for 10 seconds to disable the Power button lockout feature. Video cable is improperly connected. Connect the video cable properly.
-
Page 26: Index
Index components precautions, 1 front, 4 preparation for disassembly, 11 rear, 5 REAR COVER removal, 11 connector repair, 18 rear components, 5 DisplayPort connector location, 5 removal features, 3 REAR COVER, 11 firmware updates, 2 removal and replacement procedures, 11 front components, 5 returning to customer, 2 function button locations, 4...