SERVICE MANUAL
2.6.7 Gently remove the retaining clip as shown above. The switch can now be slid
back through the front panel.
2.6.8 Remove cables from J1, J4, J7 & J8 on Analog board and J2 & J6 on Control
board. The front panel assembly can now be completely removed. The
Housekeeping board can also be removed, if necessary, by disconnecting the
cables to J3, J7A, and J28B and then removing the (7) screws securing the
board to the chassis.
MAINTENANCE AND TROUBLESHOOTING
2-9