Cal Power TrueWave TW5250 Service Manual page 26

MAINTENANCE AND TROUBLESHOOTING
2.6.1 Remove the (20) flat-head screws securing the top cover to the chassis. Note
that some of the screws may be covered by white quality seals, and therefore,
the seals will need to be broken. Remove cover as shown above.
2.6.2 Loosen the front panel by removing the remaining (8) screws securing the front
panel to the chassis.
several ribbon cables. Extreme care must be taken not to damage these cables.
2-6
The front panel will still be connected to the unit by
TW SERIES