Declaration Of Rohs Compliance - EQD Auria EQ2688 User Manual

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive
2002/95/EC of the European Parliament and the Council on restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS Directive)
and is deemed to comply with the maximum concentration values issued by the Euro-
pean Technical Adaptation Committee (TAC) as shown below:
Substance
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent Chromium (Cr6+)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers
(PBDE)
Certain components of products as stated above are exempted under the Annex of
the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other
lamps not specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes,
and electronic ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by
weight or more lead).
Lead as an allotting element in steel containing up to 0.35% lead by weight, alumin-
ium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4%
lead by weight.
®
EQD
Proposed
Maximum
Concentration
0.1%
0.1%
0.1%
0.01%
0.1%
0.1%
iii
Actual
Concentration
<0.1%
<0.1%
<0.01%
<0.1%
<0.1%
<0.1%
EQ2688