Rear View Of The Product - EQD Auria EQ2688 User Manual

Rear View of the Product

AC IN
SERVICE PORT
1 2
Item
1 Power (AC input)
2 SERVICE PORT USB
3
HDMI 2 Input Terminal
4 HDMI 1 Input Terminal
5 PC AUDIO
6 VGA Signal Input
7 YPbPr Signal Input
YPbPr/ Audio Input
8
(left/ right)
9 SPDIF OUT
10 S-VIDEO
11 AV
AV/ S-Video Signal
12 Audio Input
(left/ right)
13 TV Input Jack
®
EQD
HDMI 2 HDMI 1
PC AUDIO
USB
3 4 5
Description
Plug-in the supplied AC Power cord and connect to the AC
input power source.
Connect this port to a PC to provide service and updates.
Connect this port to the HDMI/HDMI-DVI jack of the com-
patible equipment. *If you use HDMI-DVI
connections, please use PC Audio In for audio input.
Connect this port to the HDMI/HDMI-DVI jack of the com-
patible equipment. *If you use HDMI-DVI
connections, please use PC Audio In for audio input.
Connect the RGB Audio In on your computer to the RGB
Audio In on the rear of the LCD TV.
Connect a 15-pin D-sub RGB cable to the RGB output of
your computer and the other end to the RGB input on the
rear of the LCD TV.
Connect this jack to the YPbPr output of A/V device.
Connect the Audio in cable for YPbPr from this jack to the
corresponding connectors on your A/V device.
Connect this port to an RCA cable.
Connect the S-Video cable from the compatible device to
this connector on the rear panel of the LCD TV.
Connect the video cable from the compatible device to
this connector on the rear panel of the LCD TV.
Connect the Audio in cable for AV/ S-Video from this jack
to the corresponding connectors on your A/V device.
Connect this jack to your Cable or VHF/UHF antenna.
SPDIF OUT
PC / VGA
6 7 8
6
AV
S-VIDEO
ANT. IN
9 10 11 12 13
EQ2688