Setting The Additional Heat; Disconnecting The Compressor Unit - IVT 495 TWIN Manual To Installation, Commissioning And Maintenance

Disconnecting the compressor unit

On some occasions it may be apt to run the heat
pump as an electric boiler. Proceed then as
follows:
1. Press the right button once and the text Set the
house heating here appears on the display.
2. Turn the dial until the text Settings for
addition appears.
3. Press the right button once and the text Select
function add. heat only appears on the
display.
4. Press the right button once again and the text
Addit. heat only? appears on the display.
5. Press the right button (Yes), and OK is
displayed confirming your choice.
6. Repeat steps 1-5 to reconnect the compressor
unit. Press the left button a few times to return
to the main menu.

Setting the additional heat

23
Set the house
heating here
Settings for
addition
Select function
add. heat only 8.15
Addit. heat only?
No Yes
IVT 495 TWIN 9518799
USER
1
8