Advertisement
10
www.raider.bg
EN
Congratulations for the purchase of burnishing machine from the successfully growing brands - RAIDER. As being
properly installed and operated, RAIDER are safe and reliable machines, and work with them will bring a real pleasure.
For your convenience has been built an excellent service network of 45 service stations across the country.
Before using this hammer drill please carefully acquaint to these "instructions for use".
In interest of your safety and to ensure proper use, read these instructions carefully, including the recommendations
and warnings in them. To avoid unnecessary errors and accidents, it is important that these instructions must remain
available for future reference to all who will use the machine. If you sell it to a new owner "Instructions for Use" must
be submitted along with it, so that new owner can meet with the relevant safety measures and operating instructions.
EUROMASTER Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark
RAIDER. Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel 02 934 33 33, 934 10 10, www.raider.bg;
www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope of certification:
Trade, import, export and servicing of hobby and professional electrical, mechanical and pneumatic tools and general
hardware. The certificate was issued by Moody International Certification Ltd, England.
Parameter
Model
Nominal supply voltage:
AC Frequency:
Rated power
Speed regulation
Diameter
Protection class
EN 60745-2-3, EN 60745-2-4:
LPa=82 dB(A); LWA=93 dB(A), K=3 dB.; ah=6,0m/s2, K=1,5m/s2,
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operating a power tool.
ORIGINAL INSTRUCTION MANUAL
Dear Customer,
Technical Data
Unit
RDP-BM01
-
V AC
Hz
W
min
700-3000
-1
mm
Ø120xØ19x100 mm
-
Value
230
50
2100
II
Advertisement
