Table of Contents
Advertisement
ROUTINE USE
1
4
• Fill with water.
contaminated water. Replace pump.
• With tap closed, pump 30–40 times.
• Open tap to allow clean drinking water to flow. As flow rate reduces,
pump to maintain flow.
• Continue to pump whilst the tap is open at a rate of approximately 1 pump
per second to maintain flow.
Using the tap:
Twist tap clockwise and lock into position for a sustained flow of water or
push and hold down tap for an instant shot of water.
To release tap, twist anti-clockwise.
IMPORTANT
Always leave at least 1 inch of water in your Cube. Ensure pump is
screwed back on tightly.
5
2
1
Ensure tap area doesn't come in contact with
3
4
2
Turn tap off after use.
3
Advertisement
Table of Contents
